Note:
1.Support 8GB-128GB TF card MAX, and above 64GB card, the camera will format it to fat32 when power on.
2.The camera indicator light is off during recording.
3.The camera doesn’t enter the record mode when connected to the computer.
MD17 Operaing Guide:
MD17 time setting:
Time Setting file:
You can download above file to use it.
1).Upon power on, the device will generate a time file named SYSCFG.txt in the card;
2). Turn off the device and connect it to a computer.
3). Locate the SYSCFG.txt file and set the desired time using format:
2017-06-01 12:00:00 Y0Y
4).Save the file, disconnect the device from the computer. After power off, turn on the device again, the time setting is complete.
If you want to cancel the time stamp, setting the time using the format:
2020-12-01 12:00:00 N0Y
**The front part 2017-06-01 12:00:00 is the time format, and the N0Y is the parameter setting.
Text format: N0Y (default parameter)
Description:
First bit N- time stamp bit: Y-> display time, N-> disable display time
Second bit 0:0->1920*1080, 1->1280*720, 2->720*480
Third bit Y: loop recording switch, Y-> loop, N-> not loop
For example: N0Y, it does not display time stamp, video resolution 1920*1080, loop recording.
Question Lists:
1.Red indicator is light and no flash.
To: the camera don’t check TF card, or TF card is bad. You need to change the other one.
2.The light is falshing fast.
To: No tf card or don’t detect the card.